Free tool · Kitchen costs

Food cost percentage calculator

Updated · Ann Sutra

Quick answer

Food cost % = (opening stock + purchases − closing stock) ÷ food sales × 100. Enter a month's stock values, purchases and food sales without GST to get your actual food cost. Add one dish's ingredient cost and menu price to see its plate cost. Many Indian restaurants aim for roughly 25-32%.

For the month

Food used
₹2,60,000
Food sales
₹8,50,000

Food cost30.6%

A little high: check portions, wastage and vendor rates.

One dish

Plate cost: 31.8% of the price.

How do you calculate food cost percentage?

Add opening stock value and purchases for the period, subtract closing stock value. That gives the food you actually used. Divide it by food sales for the same period (without GST) and multiply by 100. Example: ₹80,000 + ₹2,50,000 − ₹70,000 = ₹2,60,000 used, on ₹8,50,000 sales = 30.6%.

Use the same period for all four numbers, usually a calendar month. Count closing stock on the last night of the month and use that same figure as the next month's opening stock. Value stock at what you paid, not at menu price.

Keep sales without GST. GST is not your revenue, so including it makes food cost look lower than it is. If you sell liquor, calculate beverage cost separately; mixing bar and kitchen hides problems in both.

The two calculations in this tool
WhatFormulaDefault example
Monthly food cost %(Opening stock + Purchases − Closing stock) ÷ Food sales × 100(₹80,000 + ₹2,50,000 − ₹70,000) ÷ ₹8,50,000 = 30.6%
Plate cost % (one dish)Ingredient cost of one plate ÷ Menu price × 100₹95 ÷ ₹299 = 31.8%

What is the ideal food cost percentage for a restaurant in India?

There is no official benchmark. As a rough industry estimate, quick-service outlets often run about 25-30%, casual dining about 28-32%, and cafes lower because coffee and beverages cost little per cup. The calculator calls up to 30% healthy, 30-35% a little high and above 35% high. Your own target depends on rent and menu.

Rough food cost estimates by format (industry rules of thumb, not official data)
FormatRough food cost rangeWhy
QSR / fast foodAbout 25-30%Standard recipes, high volume, fewer ingredients
Casual diningAbout 28-32%Wider menu, more perishables
CafeOften lower than casual diningCoffee and drinks carry low ingredient cost
Cloud kitchenSimilar to QSR, plus packingCount packing separately so it does not hide inside food cost
Premium / fine diningCan run higherExpensive ingredients, offset by higher prices

These ranges are estimates for planning. A restaurant paying high rent in a prime location usually needs a lower food cost than one in a cheaper area.

What is plate cost and how do you do recipe costing?

Plate cost is the ingredient cost of one serving of a dish. Recipe costing means writing down every ingredient with its exact quantity per plate, multiplying by today's purchase price, and adding it up. Divide by the menu price to get that dish's food cost %. The bottom half of the calculator does that division.

Include everything that goes on the plate: oil, butter, garnish, chutney, onions and salad, and the realistic yield after cleaning and trimming. Chicken that loses 25% weight after cleaning costs more per usable gram than its purchase rate.

For delivery, add packing as a separate line. A ₹95 plate cost with ₹20 of boxes and bags is really ₹115 per order. Then check the delivery price with the Swiggy Zomato commission calculator.

Example: recipe costing for one plate of paneer butter masala (illustrative prices)
IngredientQty per plateRateCost
Paneer150 g₹400/kg₹60.00
Tomato-onion gravy base120 g₹80/kg₹9.60
Butter and cream30 g₹500/kg₹15.00
Spices, oil, garnishLump sum—₹10.40
Total plate cost₹95.00

Rates are illustrative, not market prices. Use your own purchase bills.

What is the difference between actual and ideal food cost?

Ideal (or theoretical) food cost is what you should have used: each dish's recipe cost multiplied by how many you sold. Actual food cost comes from the stock count formula above. The gap between them is loss: wastage, over-portioning, spoilage, staff meals not recorded, free items and theft.

Example: sales of ₹8,50,000 with an ideal cost of ₹2,38,000 (28%) but an actual cost of ₹2,60,000 (30.6%) means about ₹22,000 went missing in one month. That is the number to chase, not the headline percentage.

A gap under about 1-2 points is usually normal handling loss (estimate). A wider gap means something specific is wrong, and the wastage log and item-wise stock count will usually show which ingredient.

How to reduce food cost in a restaurant: 8 tactics

Fix portions with written recipes and scoops, count stock weekly, compare vendor rates, use first-in-first-out storage, log every wastage, re-price or drop low-margin dishes, reuse ingredients across dishes, and record staff meals and complimentary items. Each closes a specific gap between ideal and actual food cost.

  1. Standard recipes and portion tools. Write the grams for every dish and give the line ladles, scoops and a scale. Over-portioning by 10% raises food cost by about 10% on that dish.
  2. Weekly stock count of high-value items. Paneer, chicken, mutton, cheese, butter, dry fruits and oil. A weekly count catches a problem in days, not at month end.
  3. Compare vendor rates. Get two quotes for your top 15 ingredients every month and compare against your purchase bills.
  4. First in, first out. Label containers with the date, put new stock behind old, and keep a list of what expires this week.
  5. Log every wastage. Burnt, spoiled, returned and dropped. If it is not recorded, it shows up as an unexplained gap.
  6. Menu engineering. Find dishes with high plate cost % and low sales. Re-price them, change the recipe or remove them; promote dishes with low plate cost and good sales.
  7. Cross-use ingredients. A gravy base or marinade used in several dishes reduces spoilage of slow movers.
  8. Record staff meals and complimentary items. They are real cost. Put them through the system as zero-price orders so they appear in reports.

How does recipe-based inventory automate food costing?

You enter each dish's recipe once. Every time the dish is sold, the software deducts those ingredients from stock automatically. Purchases add stock, wastage removes it, and the system shows cost per plate and low-stock alerts. You stop calculating ideal food cost by hand and see the gap against your physical count.

In Ann Sutra, recipes deduct stock per order, purchases and wastage are recorded, low-stock alerts warn the kitchen, and cost per plate is shown for each dish. The day close and P&L report puts food cost next to commission, expenses and GST, and you can export to Tally as XML for your accountant. See day close and P&L.

Inventory is part of the 14-day free trial with every Pro feature, no card needed. Start a free trial or see pricing. If you run a cafe, the cafe billing software page covers the beverage side.

Frequently asked questions

What is the formula for food cost percentage?

Food cost % = (opening stock + purchases − closing stock) ÷ food sales × 100, with all numbers for the same period and sales taken without GST.

What is a good food cost percentage for a restaurant in India?

There is no official figure. As a rough industry estimate, many restaurants aim for about 25-32%, with QSR near the lower end and casual dining near the upper end. High rent usually needs a lower food cost.

How do I calculate the cost of one plate?

List every ingredient in the dish with its quantity per plate, multiply each by your purchase rate (after cleaning and trimming loss) and add them up. Divide by the menu price for the plate cost %.

Should I include GST in food sales when calculating food cost?

No. Use sales without GST. GST belongs to the government, so including it makes your food cost look lower than it really is.

Why is my actual food cost higher than my recipe cost?

The gap usually comes from over-portioning, wastage, spoilage, unrecorded staff meals or free items, wrong stock counts, or theft. A wastage log and weekly count of costly items usually show which one.

Is packing part of food cost?

Track it separately. Packing is a real cost on delivery and takeaway, but mixing it into food cost hides whether the kitchen or the packing is the problem.

Related